How To Change Strap On Fitbit Versa

Need or want to replace your Fitbit Sense or Versa's wristband (Versa, Versa two, Versa 3, or Versa Lite) but can't figure out how exactly to remove the current band?

While Fitbit has ever been pretty practiced about making life easier for those who want to customize their smartwatches, changing out your bands is not one of those "easy" things.

Although Fitbit introduced an updated system to alter out the bands quickly, many owners all the same have difficulties. If that'south you, read on for best practices and tips to alter your Fitbit Versa'due south band.

How to change your Versa's or Sense's wristband

Through trial and error, we learned that the all-time way to alter a Fitbit band is to place the Versa (or whatever Fitbit tracker or smartwatch) face down on a flat surface.

If y'all usually use reading glasses, we propose you keep those on when changing bands–glasses definitely aid meet the band pins or buttons!

Your Fitbit Versa or Sense comes with two detachable bands–an upper (summit) and a lower (lesser) band. Depending on the model, bands connect to the Fitbit pebble with a pin or a button.

The newer models of Fitbits like the Sense and Versa 3 feature an updated ring organization that uses a push.
Older models of the Versa (like the Lite or two) feature a small pin that allows you to detach and reattach bands.

You but need to replace the bottom ring if yous're switching between the pocket-size and large bands for the same band manner.

How to remove a wristband from your Fitbit Sense or Versa 3

Before slapping on a new band, you'll need to remove the old one. To do that, flip your Sense or Versa three upside downwards and then that the charging pins and heart-charge per unit monitors face you.

Turn your Sense or Versa 3 on its backside and put information technology on a apartment and make clean surface
Locate the band release button for the bottom ring
Press and slide the button downwardly towards the band to release it
Keeping pressing the button and with your other mitt, gently pull the ring abroad from the Fitbit pebble

If you want to replace the entire band, repeat these steps for the ring'due south acme section, too.

How to remove a wristband from your Fitbit Versa two, Lite, or original Versa

First, flip your Versa upside down so that the charging pins and heart-rate monitors face upward.

Turn your Fitbit over and place it on a flat, clean surface
On the lesser band, locate the pin for the quick-release lever
Press this pin inward and slide the band gently to the opposite side to release it from the watch
Once you push the lever in, the band should exist complimentary from the Versa's grips. Pull the other side of the pinout from the body of the Versa.
Repeat on the other side, if changing the unabridged band

The catch in removing Fitbit wristbands is that y'all want to bending the band a flake so that the other end of the pin slides out. It may be frustrating at get-go, but it can exist washed past looking closely at the orientation.

How to replace a band on your Fitbit Versa or Sense

Install your new Sense or Versa band!

Now that your one-time band is gone, you are left with simply the body and your new band.

For newer models like the Fitbit Sense and Versa 3

Replacing the band on these models is a lot easier than earlier models, like the Versa 2!

Earlier starting, clean the band'southward ends and gently clean inside the groove where the band attaches to your Fitbit.

To adhere a band to your Sense or Versa 3, push the band'southward ends into the Fitbit pebbles end grooves until you hear a click and the band snaps into place. change your Fitbit Versa 3 or Fitbit Sense band

If you're replacing the entire band, remember that the band with the loops attaches to the top of the lookout man. All the same, if preferred, y'all can switch this placement–both ring ends will adhere to either side of your Fitbit pebble.

For older Versa Series, follow these instructions

Earlier starting, clean the band'southward ends and gently make clean within the groove where the band attaches to your Fitbit.

Locate both the holding pivot and the quick release lever on each side of your new band
To attach a new ring, hold the band at a 45° angle (A)
Slide the ring's property pin into the notch on the Fitbit device (B)
Press the quick-release lever in and push & slide the other terminate of the ring into place (C)
When both ends of the pin are inserted, release the quick-release lever
Repeat these steps for the other side, and voila. You have your brand new Fitbit Versa band installed, making information technology, so you are now stylin' and profilin'. Or, you know, just going to the gym.

Are y'all having more trouble replacing your Fitbit Versa's ring?

Take a look at Fitbit'due south video on how to switch bands on your older model Fitbit Versa!

Determination

As we stated above, the Fitbit Versa is one of the best smartwatches on the market, and you really tin can't go wrong. But nosotros want to hear from you!

Let us know in the comments whether you lot decided to go a new band for your Versa and which one you chose. Besides, if you have run into issues, don't hesitate to leave us a comment, and we will exist more than than happy to help alleviate these issues!

Source: https://www.myhealthyapple.com/change-band-fitbit-versa/

Posted by: houserouragess.blogspot.com